Pegatron IPMTB-GS - BIOS Power Management Settings; ACPI Configuration Settings

IPMTB-GS Motherboard Reference Guide 25
BIOS SETUP UTILITY
Main
Boot
Power
Exit
Select the ACPI
state used for
System Suspend.
F1
Select Screen
Select Item
Go to Sub Screen
General Help
Save and ExitF10
ExitESC
Enter
ACPI Configuration
Suspend mode [Auto]
AC Power Loss
Power On PME# [Disabled]
[Disabled]
[Power On]
Power On RTC Alarm
Security
Advanced
v02.61 (C) Copyright 1985-2008, American Megatrends, Inc.
Power
The power menu items allow you to view or change system power management
preferences.
ACPI Conguration
Suspend Mode
This item allows you to select the Advanced Conguration and Power Interface
(ACPI) state to be used for system suspend.
Default: [Auto]
Power On By PME#
This item allows you to change the Power On By PME# setting.
Default: [Disabled] / Options: [Disabled] [Enabled]
Power On RTC Alarm
This item allows you to change the Power On RTC Alarm setting.
Default: [Disabled] / Options: [Disabled] [Enabled]
AC Power Loss
When set to [Power Off], the system goes into off state after an AC power loss.
When set to [Power On], the system goes on after an AC power loss. When set to
[Last State], the system goes into either off or on state, whatever the system state
was before the AC power loss.
Default: [Power On]
8 BIOS Setup reference