Pego ECP202 EXPERT Use And Maintenance Manual

ECP202 EXPERT
INTRODUCTION
Pag. 3 1.1 General
Pag. 4 1.2 Product ID codes
Pag. 4 1.3 Overall dimensions
Pag. 4 1.4 Identification data
INSTALLATION
Pag. 5 2.1 Important information for the installer
Pag. 5 2.2 Standard assembly kit
Pag. 6 2.3 Installing the unit
TECHNICAL CHARACTERISTICS
Pag. 8 3.1 Technical characteristics
WARRANTY
Pag. 9 4.1 Warranty
PARAMETER PROGRAMMING
Pag. 10 5.1 Control panel
Pag. 10 5.2 Frontal keypad
Pag. 11 5.3 LED display
Pag. 12 5.4 General
Pag. 12 5.5 Key to symbols
Pag. 12 5.6 Setting and displaying set points
Pag. 13 5.7 Level 1 programming
Pag: 13 5.8 List of Level 1 variables
Pag. 14 5.9 Level 2 programming
Pag. 14 5.10 List of Level 2 variables
Pag. 17 5.11 Switching on the ECP202 EXPERT electronic controller
Pag. 17 5.12 Hot /cold activation/deactivation conditions
Pag. 17 5.13 Manual defrosting
Pag. 18 5.14 Defrost with heater and temperature control
Pag. 18 5.15 Hot gas defrosting
Pag. 18 5.16 Pump down function
Pag. 18 5.17 Password protection
OPTIONAL KIT
Pag. 19 6.1 TeleNET monitoring / supervision system
Pag. 19 6.2 Net configuration with Modbus-rtu protocol
TROUBLESHOOTING
Pag. 20 7.1 Troubleshooting
APPENDICES
Pag. 21 A.1 EU declaration of conformity
Pag. 22 A.2 ECP202 EXPERT wiring diagram
Pag. 23 A.3 Part list
CHAP. 1
CHAP. 2
CHAP. 3
CHAP. 4
CHAP. 5
CHAP. 6
CHAP. 7
ENGLISH

Pego ECP202 EXPERT Specifications

General

Brand	Pego
Model	ECP202 EXPERT
Category	Control Panel
Language	English