Peiying PY-9348 User Manual

22
Owner’s manual
EN
INSTALLING THE FRONT PANEL
To install the front panel, insert the panel into the housing and make sure the panel
is properly installed, otherwise, abnormalities occurs on the display or some keys will not function
properly
CLEANING THE CONNECTOR
If the connector between the main unit and the front panel is dirty, it may result the unit in
abnormal working condition. To avoid such problem happening , please detach the front
panel, and clean the connector with an alcohol swab. Gently clean and avoid damaging
the connector.
NOTE: For safekeeping, always shut down the generator and take out the key from the ignition before cleaning. And never
keep your nger of any metal device in touch with the connector directly.
DETACHING THE FRONT PANEL
Press REL but ton in the upper left
cor ner , and hen front panel will not
funct ion proper ly.
REMOVING THE FRONT PANEL
When the front panel was turned down
to a pos ition of 90 , hold and slide the
front panel to left, and then pul l it out .
2
N
D
1ST
A
B
RE LE AS E

Peiying PY-9348 Specifications

General

Brand	Peiying
Model	PY-9348
Category	Car Receiver
Language	English