4
Owner’s manual
EN
NOTES ON INSTALLATION
The unit is designed for 14.4V DC, negative ground operation system only. Before installing the
unit, make sure your vehicle is connected to 14.4V DC negative grounded electrical system.
The negative battery terminal must be disconnected before making connections, Incorrect can
reduce damaging to the unit due to short circuit.
Be sure to connect the color coded leads correctly according to the diagram. Incorrect connec-
tions may cause the unit malfunction or damage the vehicle’s electrical system.
Be sure to connect the speaker(-) leads to the speaker(-)terminal. Never connect the left and right
channel speaker cables each other or to the vehicle body. Do not block vents or radiator panels.
Blocking them will cause heat to build up inside and may result in re.
After the completion of the installation and begin to operate the unit(including replacing the batte-
ry), please press the RESET button on the front panel with pointed objects(such as ball pen)bo set
the unit to initial status.
DO NOT ATTEMP TO MODIFY THE UNIT, MODIFYING THE UNIDO NOT MAY CAUSE AN
ACCIDENT.
STOP THE VEHICLE BEFORE CARRYING OUT ANY OPERATION THAT COULDINTERFERE
WITH YOUR DRIVING.
DO NOT TURN ON THE UNIT IF THE TEMPERATURE INSIDE THE VEHICLE IS OUT OF - 20 C
TO 60 C
THIS PRODUCT IS DESIGNED FOR ONE SINGLE VIDEO OUTPUT, PLEASE USE A SPLITTER
IF YOU WOULD LIKE TO CONNECT FOR MULTIPLE VIDEO OUTPUT.
To Next Page
Loading...
Need help?
General
