EN 6
Installation
• Install the hob on a flat, stable and horizontal base.
• Keep a free space of at least 2 cm around the hob.
• Do not place any inflammable or deformable objects directly
beneath the hob.
Dimensions
Gas connection
• The fitting of the appliance should only be carried out by a
registered Corgi gas fitter.
• Please note: the type of gas and the country for which the
appliance has been designed are indicated on the ratings plate.
• This is a category 1 appliance.
• The gas connection must comply with national and local
regulations.
• A safety hose should be approved and suitable for the
type of gas for which the appliance is adjusted see
rating plate).
• The safety hose should not be longer than 2 meter.
• Please note: a safety hose may not be bent and must not come
into contact with moving parts of kitchen units.
• Please note: a safety hose should not be above the appliance due
to the fact that the flames of the burners could damage the hose.
• In all cases the connection tap for the appliance must be
positioned such that it is easily accessible.
POSITION AND ARRANGEMENT
600
540
31
91
540
To Next Page
Loading...
