EasyManua.ls Logo

Pelgrim PK454WIT - Decorative Glass Cover

Pelgrim PK454WIT
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN 11
Decorative glass cover
Always clean the decorative glass cover after use.
Clean the glass panel with a special cleaning product for glass.
Water stains or limescale are best cleaned using cleaning vinegar.
If the lid is very dirty we advise you to soak the decorative glass
cover in water with a bit of dishwasher detergent for a while (e.g. by
putting a humid cloth on top of the glass cover).
Removing the decorative glass cover
1. Open the decorative lid.
2. Carefully lift the decorative glass cover out of the hinged brackets.
Placing the decorative glass cover
1. Carefully lower the decorative glass cover into the hinged brackets.
2. The decorative lid must only be placed vertically (see illustration).
If this does not work, then the hinges need to be replaced. Never
randomly switch the location of the hinges, because if they are
wrongly located, then the lid cannot be brought to a standstill and it
can drop down.
Attention! Always check if the decorative lid can be brought to a
standstill after re-installing it.
3. Close the decorative glass cover.
MAINTENANCE

Related product manuals