13
STORAGE
•
Store the Tread in a dry, indoor area.
•
Remove the Safety Key and store it in a separate
location when the Tread is not in use.
•
To reattach the Safety Key, insert the magnet end into
the gap under the center button, run the cord through
the groove around the center button, and place the
clip next to the magnet.
TRANSPORTATION*
•
Before moving the Tread, set the incline to 2% or higher
to raise the front feet.
•
Make sure to power down and unplug the Tread before
moving it.
•
One person stands at front, holding the handrail.
•
One or two people lift from the back, using handholds.
•
Tilt the Tread forward to rest on incline wheels.
•
Slowly and carefully roll the Tread backwards or forwards.
*For more information on moving the Tread, contact
member support.
CAUTION Do not attempt to transport the Peloton Tread with fewer than two people.
To Next Page
Loading...
