Peloton TR-01 - Maintenance; Cleaning the Tread; Maintenance Schedule

MAINTENANCE
CLEANING THE TREAD
Clean the Tread regularly for optimal performance
and longevity.
•
Clean surfaces with a damp cloth and mild,
soapy water.
•
Never use abrasive cleaners.
•
Never spray or pour liquid directly on Tread
surfaces. Never allow liquid to drip between the
slats or into any other opening on the Tread.
•
Before powering off the Tread for cleaning,
set the incline to 2% or higher to allow access
to the area underneath the Tread.
•
Always power off and unplug the Tread
before cleaning.
MAINTENANCE SCHEDULE
WEEKLY:
•
Clean Tread surfaces
•
Check power cord for damage
•
Clean the area underneath the Tread
MONTHLY:
•
Check the entire Tread for wear and damage
•
Test the safety key by pulling it out while
walking on the Tread
22
SAFETY INFORMATION
The safety and integrity of the Tread can only
be maintained when it is regularly examined for
damage and repaired.
It is the owner’s sole responsibility to ensure that
regular maintenance is performed.
Replace worn or damaged parts immediately.
Do not use the Tread until repairs are made.
Use only original parts from Peloton.