PENKO 1020 Series User Manual

1020 Mono Filler
27
To access the DAC setup, select In/Outputs from the System Setup Menu and press Enter.
Select DAC Setup and press Enter.
DAC setup
Setting
Indicator
Speed
Min
0.00%
Max
100.00%
Mode
4 – 20 mA
To access the Weigher setup, select Indicator Setup from the System Setup Menu and press
Enter. Select Indicator and press Enter, enter the TAC code (the TAC code is visible in the
bottom right corner of the LCD screen) and press Enter. Select Weigher and press Enter.
Weigher
Setting
Unit Label
Kg
Step
1
Decimal point
0.00
Operation Mode
Industrial
Max Load
1000.00
To access the Stable Condition setup, select Indicator Setup from the System Setup Menu and
press Enter. Select Indicator and press Enter, enter the TAC code (the TAC code is visible in the
bottom right corner of the LCD screen) and press Enter. Select Stable Condition and press
Enter.
Stable Condition
Setting
Range
0.10 kg

PENKO 1020 Series Specifications

General

Brand	PENKO
Model	1020 Series
Category	Controller
Language	English