PenRecorderPro HD2 - Operating Tips for HD2; Charging the Pen Recorder

4
1Operating Tips
2Charging
**PLEASE READ**
A. The indicator light on the back of the HD2
can be dicult to see if you look at it straight
on. To see it more easily try looking through the
hole at an angle;
B. If your HD2 malfunctions, please reset it
(step 10);
Before using the HD2 for the rst time, we
recommend giving it a full charge. It has an
internal rechargeable battery. The battery can
be charged the following ways:
A. Plug into a computer’s USB port;
B. Plug the HD2 into one of our optional
charging accessories (wall/car/portable charger)
If you use your own charger, make sure it is
no more than 5V and 1000mAH output (most
standard cell phone chargers will work);
C. While charging, the light will ash blue; when
charging is complete the light will stop ashing
and turn a solid blue;