PenRecorderPro HD2 - Audio Only Recording Mode; Automatic Power Off Features

8
8Audio Only
Recording
9Auto Power O
A. Enter standby mode (see step 3b, indicated
by a solid blue light);
B. Click the button 3 times quickly, the blue light
will blink several times and then turn o. The
HD2 will automatically begin recording audio;
C. Click the top button once to stop recording.
The HD2 will enter standby mode (solid blue
light);
A. When the battery is about to run out, the
blue light will blink for a few seconds, and the
HD2 will shut down;
B. When the memory is full, both the blue and
green light will blink for a few seconds and
the HD2 will shut down (unless it is in motion
activated mode);
C. If the HD2 is in standby mode for over 2
minutes, it will shut down;