5
3Turn on/o &
Standby
4Continuous
Recording
A. Power on: press and hold the function button
for about 1-2 seconds and release (you will
see the blue light come on while you press the
button). The green light will icker several times
while pen is loading. The green ickering light
will turn o and the HD2 will begin to record
video. The indicator light will remain o while it
is recording;
B. Standby: During recording, press the function
button to stop recording and enter standby
mode. This mode is indicated by a solid blue
light. Standby means that the HD2 is on, but not
recording. The device will automatically turn o
after 2 minutes in standby;
C. Power o: Push and hold the function button
until all indicator lights turn o;
A. Power on the HD2 as in step 3. The HD2 will
automatically begin to record video;
B. Press button to stop recording. The HD2 will
enter standby mode and the indicator light will
be solid blue;
C. Press button again to begin recording.
Indicator light will icker green to let you know
recording has started;
To Next Page
Loading...
