PenRecorderPro HD2 - Motion Activated Recording

6
D. Each time you start/stop recording, a new
video le is created;
NOTE: In order to avoid large le sizes that
may cause the HD2 or your computer to freeze,
recordings are divided into 10 minute intervals.
NOTE: Be sure to open lens cover before
recording.
5Motion Activated
Recording
A. Enter standby mode (see step 3b, indicated
by a solid blue light);
B. Click button 4 times quickly, the green light
will begin to blink. The HD2 is now recording
video in motion activation mode. The green
light will blink continually;
C. When no motion is detected the green light
blinks slowly and the recording is paused;
D. When motion is detected, the green light
blinks quickly and the HD2 is recording;
E. Click button once to pause recording,
indicated by a solid green light;
F. Exit motion activation mode: With solid green
light showing, click button 4 times quickly. The
HD2 will enter standby mode indicated by a
solid blue light;