PenRecorderPro HD2 - Loop Recording Functionality; Taking Photos with the Pen

7
6Loop Recording
Explained
7Taking Photos
This pen features loop recording while in motion
activation mode. When the memory lls up the
HD2 will automatically start recording over the
oldest les. While recording in motion activation
mode the HD2 will never stop recording due to
a full memory.
NOTE: Loop recording does not function in
continuous video recording or audio only mode.
A. Enter standby mode (see step 3b, indicated
by a solid blue light);
B. Double click the button to go into photo
mode; the green and blue light will start
ashing alternately;
C. Click the button once to take a picture, the
blue light blinks twice to indicate that the
picture was taken successfully;
D. To quit photo mode, double-click the button
again, the device will go back to standby mode;