14DBP-001 10
TRANSPORT
Clean reflectors, slow moving vehicle signs, and lights before transporting.
Do not allow riders, on or in the implement.
Stay away from overhead power lines when loading. Electrocution can occur without
contact.
Use hazard flashers on tractor when transporting on roads, and follow all local laws.
Attach securely to the tractor using a retainer on the drawbar, and a safety chain.
Make sure you are in compliance with all local regulations regarding equipment on public
roadways and highways.
Make sure SMV (Slow Moving Vehicle) emblem and all the lights and reflectors required
by law are in place, clean, and can be seen clearly by overtaking and oncoming traffic.
Reduce speed on rough roads and surfaces.
Add extra lights or use pilot vehicle when transporting during times of limited visibility.
DANGER Never overload the dump box. Overloading the box is dangerous and can
cause extensive damage
CAUTION Reduce speed when turning or travelling across uneven ground
WARNING Avoid extending or transporting implement on side hills or steep inclines
Use extra caution when transporting on roadways
-Match speed to operating conditions.
-Stay away from ditches and riverbanks.
-Use caution and pay attention.
-Use front weights to promote stability.
-Start forward motion slowly and change speed gradually.
-Drive around ditches.
-Use caution when braking down a grade.
It is recommended and good practice to:
-Lock the steering axles in a straight forward and reverse motion.
-Unlock the steering while turning
**** It is the duty of the operator to ensure that the dump box is maintained and operated
in accordance with all local and national regulations
To Next Page
Loading...
