14DBP-001 12
Pre- Operation Check
Read and understand manual carefully
Check Tires and lugs….Torque on the wheel lugs, Tire pressure (See pg.11)
Check fasteners
Check Pivot points and pins
Check Hoses and hydraulic cylinders, fittings and couplers
Check Grease points and adequate amount of grease is applied
Check Connections of the hoses and electrics and insure no pinch points and installed
properly
Check hitch and draw bar connection insure they are level and that the weight is
distributed evenly
Check lights and slow-moving vehicle are clear of debris
Tractor Requirements
DB30 = 140Hp
DB40 = 160Hp
DB50 = 190Hp
DB70 = 240Hp
To Next Page
Loading...
