14DBP-001 13
Connection
Coupling to tow vehicle – Hitch
Reverse the towing vehicle until hitch is lined up with the eye
Raise the tow hitch and lock into raised position
WARNING : Ensure all personnel are clear of danger around the dump box
WARNING : Make sure the trailer is properly secure and attached before moving
WARNING : Never park the dump box with the tub in the raised position
WARNING : Park dump box on firm and level ground
Coupling Hydraulic Hoses
It is import to keep the hose connections clean.
Connect the hydraulic service line to the connection on the tractor
Uncoupling the tow vehicle - Hitch
Ensure the tipping body is lowered fully
Ensure the drawbar is in the tow position
Lower the trailer onto the drawbar
Decouple all hoses and connections
When disconnected pace in holder.
Steering Axle Connections
Some models are equipped with steering axles, for easier turning and maneuvering.
A dual hydraulic connection from the tractor is used for this.
When traveling forward the spool valve should be moved to retract cylinders this allows
the steering axle to follow the lead axle.
WARNING : When traveling in the reverse direction the spool valve should be moved to
the extend the cylinders. The trailer wheels will then stay in line and locked.
Electrical connection
Ensure Prongs are clean
Walk around and check that lights are working properly
To Next Page
Loading...
