Pentair 920 Series - 920 Series HTC Configuration Sheet V3.1 X and V3.2 X

To Next Page

To Previous Page

79 / 82

EN- Raychem920series-IM-H5687405/15

INDUSTRIAL HEAT TRACING SOLUTIONS

G.2 920 SERIES HTC CONFIGURATION SHEET V3.1X AND V3.2X

= Most commonly changed setting

IMPORTANT: Select temperature units before any other settings are entered.

Configuration Mode Main Menu

Parameter Factory User

Control Setpoint 68°F (20°C)

Lo TS 1 14°F (–10°C)

Lo Load 1.0 A

Hi GFI 50 mA

GFI Trip 75 mA

TS Alarms Configuration Sub-Menu

Parameter Factory User

TS 1 Fail Enable

Lo TS 1 Enable

Lo TS 1 14°F (–10°C)

Hi TS 1 Disable

Hi TS 1 *n/a (212°F (100°C))

TS 2 Fail Disable

Lo TS 2 Disable

Lo TS 2 *n/a (14°F (–10°C))

Hi TS 2 Disable

Hi TS 2 *n/a (212°F (100°C))

Lo TS Filter 0 min

Hi TS Filter *n/a (0 min)

LatchTSAlarms Yes

CTL TS Fail Enable

Other Alarms Configuration Sub-Menu

Parameter Factory User

Lo Load Enable

Lo Load 1.0 A

Lo Load Filter 0 sec

Hi Load Disable

Hi Load *n/a (30.0 A)

Hi Load Filter *n/a (0 sec)

Hi GFI Enable

Hi GFI 50 mA

Hi GFI Filter 0 sec