Need help?Do you have a question about the Pentair AUTOTROL 760 CONTROL 255 and is the answer not in the manual?
General| Model | AUTOTROL 760 CONTROL 255 |
|---|---|
| Operating Temperature | 34 – 120°F (1 – 49°C) |
| Power Supply | 24 VAC |
| Timer Type | Electronic |
| Voltage | 24 VAC |
| Application | Water softening, filtration |
| Operating Pressure | 20 – 125 psi (1.4 – 8.6 bar) |
| Regeneration | Downflow or Upflow |
| Frequency | 60 Hz |
| Backup Battery | Yes (Super capacitor) |
| Flow Rate | Up to 27 gpm (6.1 m3/h) |
Guidelines for safe electrical connections and component handling.
Precautions for lubricants, fittings, plumbing, and soldering.
Important general precautions for operation, temperature, and water quality.
Identification and overview of 740 and 760 controller types.
Step-by-step guide for initial controller programming and system setup.
Steps for initial power-up, including camshaft rotation and self-test.
Detailed steps for programming the controller for system startup.
Common controller error messages and their causes and corrections.
Detailed guide for diagnosing and resolving system-related issues and problems.
To Next Page