Need help?Do you have a question about the Pentair Goyen Mecair FFA and is the answer not in the manual?
Explains manual scope, safety symbols, and general safety procedures.
Details risks like explosion, electric shock, and handling precautions.
Describes the FFA's application and limits for safe operation.
Information on serial numbers, abbreviations, and spare parts availability.
Declares compliance with EU Directives (LVD, EMC, ATEX).
Lists relevant ATEX standards (EN 60079-0, EN 60079-15, EN 60079-31).
Identifies and illustrates the FFA sensor and control unit.
Explains the system's function, sensor technology, and control unit features.
Defines hazardous zones (Zone 2, 22) and provides a functional diagram.
Details specific requirements for safe installation and operation of the sensor.
Explains the markings and certifications on the equipment.
Details operating conditions like temperature, velocity, and hazardous zone classification.
Provides detailed sensor specifications, dimensions, and material information.
Covers control unit details, power requirements, and power supply cable specs.
Outlines the minimum requirements for sensor cable type, size, and compliance.
Covers sensor positioning, location requirements, and general cabling guidelines.
Details sensor grounding requirements and safe cable routing practices.
Provides safety information and step-by-step instructions for fitting the sensor to the stack.
Explains how to use the navigation keys and the main display screens.
Details how to interpret comms status and various dust level alarm indicators.
Covers basic operations, including setting and activating a user PIN for security.
Details how to change basic and advanced settings, including trimming.
Step-by-step guide for setting, activating, and managing the user PIN.
Instructions for adjusting the 4-20 mA output signal for calibration.
Outlines critical safety precautions and the recommended preventative maintenance schedule.
Provides detailed procedures and safety warnings for handling sensors in hazardous areas.
Step-by-step guide for cleaning the sensor probe and the control unit.
Addresses common issues like loss of communication and sensor malfunction.
Explains how to perform manual checks and interpret sensor health indicators.
Information regarding waste disposal and hazardous substance restrictions.
Details the materials used in the control unit and sensor construction.
General| Series | FFA |
|---|---|
| Enclosure Rating | IP65 |
| Application | Dust collector systems |
| Voltage | 24V DC |
| Orifice Size | Not applicable |
| Model | FFA |
| Input Voltage | 24V DC |
To Next Page