Need help?Do you have a question about the Pentair Fleck 2910 NXT2 and is the answer not in the manual?
General| Control Type | Electronic |
|---|---|
| Valve Type | Piston |
| Display | LCD |
| Model | 2910 NXT2 |
| Application | Water Softening, Filtration |
| Pressure Rating | 125 PSI |
| Controller | NXT2 |
| Timer Type | Digital |
| Backwash Flow Rate | 52 GPM (11.8 m3/h) |
Parameters related to the initial setup and installation of the device.
Parameters defining the hydraulic configuration of the water softener system.
Electrical specifications including voltage and frequency for system operation.
Parameters for configuring the system's software and regeneration cycles.
Details the purpose and intended audience of the user guide.
Information regarding the document's release history and versions.
Identifies the manufacturer and the specific product model.
Lists the directives, guidelines, and technical standards the product complies with.
Outlines Pentair's warranty conditions and liability limitations.
Identifies the location of the serial label on the device.
Highlights essential safety instructions to prevent injury and damage.
Specifies the required training and qualifications for system operators.
Advises on safety measures concerning system components and high voltages.
Provides recommendations for maintaining system hygiene and disinfection.
Details the hydrostatic and working pressure, and maximum service flow rate.
Specifies operating conditions including humidity, voltage, and temperature.
Illustrates and describes the main components of the control system.
Explains how to bypass the softening system during normal operation or in case of a problem.
Guides through the initial programming of key system parameters.
Allows copying settings from a master unit to other connected units.
Enables troubleshooting by accessing recorded system information.
Offers advice on using correct salt and managing sanitization processes.
Details how to initiate delayed or immediate regeneration cycles.
Explains how error screens appear and what they signify.
Emphasizes the importance of regular maintenance by qualified personnel.
Provides steps for technical support, including information collection.
To Next Page