HAFFMANS ICC
Page 18 of 49 ICC
5.2 Mounting instructions PET-bottle holder (option)
The ICC-04 is equipped with a guard.
This guard is to be removed in case the ICC-04
is used with the PET-bottle holder.
Instruction:
1. Loosen the two screws using a 3 mm
allen key.
2. Remove the guard.
3. Remove the extensions.
4. Important! Remount the two screws in
the two rods.
Detail of the screw in the rod.
The screws prevent the temperature sensor from
being lifted too far which would damage the
electrical connection.
To Next Page
Loading...