© Copyright 2005 General Electric Company
Printed in USA P/N 1268103 Rev B
Step 7
Remove the overlay sticker from the Logix control and
replace with the included new overlay that features the
check salt light opening. The old overlay sticker can be
easily peeled off with a knife or screwdriver.
Summary Chlorine Generator
The chlorine generator feature is constantly checking for
salt and will produce chlorine throughout the regeneration
process. This automatic monitoring system will only
produce chlorine when a salt/regenerant is available in the
brine line.
The chlorine generator will produce up to a maximum of
4 ppm of chlorine. The chlorine generator is not designed
to be used with special medias that require chlorine for
proper application. The chlorine generator provides
chlorine for aesthetic chlorination of media bed.
No Salt Detector
The no salt detector operates like the chlorine generator,
except no chlorine is produced.
The check salt light will illuminate whenever the brine
concentration falls below 5 to 7 salometer point.
NOTE: Ensure that the refill rate of the probe
assembly matches the original refill flow
control assembly.
To Previous Page
Loading...
Need help?
General
