5 SHURFLO WATER BOOST MODULAR FILTRATION SYSTEM INSTALLATION AND OPERATION GUIDE
SYSTEM MOUNTING
The system is design to be mounted in the upright position, in close proximity to a water source and power supply (within
six (6) feet of system mounting location). Before mounting system, please refer to the max. weight and system dimension
specifications in the previous page.
The system may be mounted on the wall, on a Pentair
®
Shurflo
®
rack or on an existing general beverage rack.
Wall Mount
Utilizes slide track bracket included in packaging.
Identify suitable wall area to mount slide track bracket with enough room
laterally (side to side) for the system to be slid into or out of position from at
least one of the sides once the slide track bracket has been secured to the wall.
1. Locate wall studs (or use suitable wall anchors) to mount slide track
bracket.
2. Secure one of four provided hole locations on the bracket.
3. Mark remaining hole locations using a level and secure remaining
three anchors.
4. Slide system into place.
Pentair Shurflo Rack Mount
Slides onto Pentair Shurflo Slide rack
Requires a rack height of at least three shelves high to mount the system in the rack and allow the proper vertical clearance.
Recommended placement of the system is on the left hand side (facing the front of the BIB rack) for easy access to the valve to
pre-charge the accumulator tank.
• The system is attached to the Pentair Shurflo BIB rack in one simple step by sliding system into top slide track channel
and centering system between leg uprights
General Beverage Rack Mount
Utilizes hooks included in packaging
Requires a rack height of at least four shelves high to mount the system in the
rack and allow the proper vertical clearance. Recommended placement of the
system is on the left hand side (facing the front of the BIB rack) for easy access to
the valve to pre-charge the accumulator tank.
1. Remove the two bolts from the accumulator tank securing the hooks.
2. Rotate hooks 180 degrees and re-tighten bolts.
3. Hang assembly on side of BIB rack centering between leg uprights.
4. Secure assembly with zip tie straps.
Slide track bracket
To Next Page
Loading...
