Pentair SWIMMEY Series User Manual

English
Deutsch
Nederlands
Español Italiano
3
6
9
12
15
18
INSTALLATION GUIDE / INSTALLATIEHANDLEIDING
BEDIENUNGSANTLEITUNG / GUIDE D’INSTALLATION
GUIA DE INSTALACION / GUIDE ALL’INSTALLAZIONE
Français
SWIMMING POOL PUMP
IMPORTANT SAFETY INSTRUCTIONS READ AND FOLLOW ALL INSTRUCTIONS SAVE THESE INSTRUCTIONS
AQUATIC SYSTEMS 253PB410 (Rev. 09/2016)
SWIMMEY
™

Pentair SWIMMEY Series Specifications

General

Brand	Pentair
Model	SWIMMEY Series
Category	Swimming Pool Pump
Language	English

Summary

General Safety Instructions

Safety Warnings and Symbols

Explains safety symbols (Danger, Warning) and their associated risks.

Health and Injury Warnings

Warns of serious health effects or fatal injury from not following instructions.

Chapter 3 - Installation

Electrical Safety During Installation

Ensure pump is disconnected from electrical supply when installing.

Environmental Protection

Chapter 4 - Electrical Connections

Voltage and Frequency Verification

Grounding Requirement

Installer must ensure the electric system is grounded per law.

Circuit Breaker Recommendation

Use a high-sensitivity circuit breaker (D=30 mA).

Chapter 5 - Starting the Unit

Prohibition of Dry Running

Do not operate the pump without fluids.

Discharge Valve Operation

Chapter 6 - Maintenance and Troubleshooting

Servicing Electrical Safety

Ensure machine is disconnected from electric power before servicing.

Troubleshooting: Pump Not Running

Troubleshooting: Pump Runs, No Flow

Troubleshooting: Pump Stops Due to Thermal Trip

Wiring Diagrams

Single Phase Wiring Diagram

Three Phase Wiring Diagram