Pentair Teel 4RJ93 - User Manual

F
R
A
N
Ç
A
I
S
E
S
P
A
Ñ
O
L
®
Teel Pool Pump with
Integral Trap
Operating Instructions & Parts Manual 4RJ93, 4RJ94 and 4RJ95
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or
property damage! Retain instructions for future reference.
Form 5S4186
®
E
N
G
L
I
S
H
Printed in U.S.A.
09319
1100/379/VCPVP
Unpacking and Inspection
Handle with care. Check items received
against packing list to be sure that all
equipment has been received. Inspect
for shipping damage. If found, file
claim with carrier immediately.
IMPORTANT
SAFETY
INSTRUCTIONS
Always follow basic safety
precautions with this equipment,
including the following:
To reduce the risk
of injury, do not
permit children to use this product unless
they are closely supervised at all times.
This pump is for
use with
permanently installed pools and may
also be used with hot tubs and spas if so
marked. Do not use with storable pools.
A permanently installed pool is
constructed in or on the ground or in a
building such that it cannot be readily
disassembled for storage. A storable
pool is constructed so that it may be
readily disassembled for storage and
reassembled to its original integrity.
SAVE THESE
INSTRUCTIONS
READ AND
FOLLOW SAFETY
INSTRUCTIONS!
This is the safety alert symbol.
When you see this symbol on your
system or in this manual, look for one of
the following signal words and be alert
to the potential for personal injury.
Warns about
hazards that will
cause death, serious personal injury, or
major property damage if ignored.
Warns about
hazards that can
cause death, serious personal
injury, or major property damage if
ignored.
Warns about
hazards that will or
can cause minor personal injury or
property damage if ignored.
NOTE: Indicates special instructions
not related to hazards.
Carefully read and follow all
safety instructions in this manual
and on equipment. Keep safety
labels in good condition; replace if
missing or damaged.
4RJ93 1 15.3/7.6 115/230 1 60 3450 230V 2” 2” 14
7
⁄16”10
23
⁄32”25
1
⁄2” 37 lbs.
4RJ94 1
1
⁄2 19.2/9.6 115/230 1 60 3450 230V 2 2 14
7
⁄16 10
23
⁄32 26
1
⁄2 44
4RJ95 2 12.0 230 1 60 3450 230V 2 2 14
7
⁄16 10
23
⁄32 27 45
Specifications
Motor N.P.T.
Max Load
Motor
Conn. Suc. Dis.
Dimensions
Model HP Amps Volts PH Hz RPM for Inlet Out H W L Wt
Performance Chart
4RJ93 1 100 92 85 78 70 60 35 – – 66’
4RJ94 1
1
⁄2 – 120 113 106 98 90 74 53 30 75
4RJ95 2 – – – 126 118 108 88 63 45 78
Gallons of Water Per Minute at Total Feet of Head
Max.
Model HP 25’ 30’ 35’ 40’ 45’ 50’ 60’ 70’ 75’ Head
Description
Teel self priming centrifugal pumps (Model Nos. 4RJ93, 4RJ94, and 4RJ95) with
extra large integral trap are for use with swimming pools and spas. Maximum
suction lift 10’. Models 4RJ93, 4RJ94 (1 and 1
1
⁄2 HP) are equipped with 115/230V dual
voltage capacitor start motors. Model Number 4RJ95 (2 HP) is equipped with 230V
single voltage capacitor start motor.
Bodies are a blend of glass-reinforced, highly corrosion-resistant thermoplastic.
High flow, medium head, and quiet operation.

Summary

Description

Important Safety Instructions

Performance Chart

Specifications

General Safety Information

Teflon Taping Instructions

Instructions for using Teflon tape on threaded pipe connections for pump installation.

Piping Guidelines

Guidelines for pipe size, support, and slope for optimal pump performance.

Pool Pump Suction Requirements

Critical safety requirements for pump suction systems to prevent entrapment.

Installation Procedures

Entrapment Protection

Requirements for preventing suction entrapment and hair entanglement hazards.

Suction Outlet Covers

Mandates for maintenance and proper installation of suction outlet covers.

Outlets Per Pump

Specifies the number and placement of suction outlets for pool pump systems.

Water Velocity Requirements

Defines maximum water velocity limits for suction fittings to ensure safety.

Testing and Certification

Requirements for suction outlet covers to be tested and certified by a testing laboratory.

Fittings Guidelines

Recommendations for using appropriate fittings to maintain flow efficiency and avoid air traps.

Electrical Safety Precautions

Electrical System Details

Voltage Considerations

Guidelines on maintaining correct voltage for motor operation and preventing damage.

Grounding and Bonding Procedures

Procedures for grounding and bonding the motor and system for electrical safety.

Wiring Guidance

Guidance on permanent connection and circuit breaker sizing for the pump.

Pump Operation

Priming the Pump

Step-by-step instructions for filling the pump and piping with water before starting.

Storage and Winterizing

Instructions for draining and protecting the pump from freezing temperatures.

Draining the Pump

Procedures for safely draining the pump and piping system.

Maintenance Procedures

Pump Service Requirements

Specifies that pump servicing should only be performed by qualified personnel.

Pump Disassembly and Old Seal Removal

Detailed steps for disassembling the pump and removing the old shaft seal.

Pump Reassembly and New Seal Installation

Limited Warranty Information

Repair Parts List

Troubleshooting Guide

Pentair Teel 4RJ93 Specifications

General

Brand	Pentair
Model	Teel 4RJ93
Category	Swimming Pool Pump
Language	English