EasyManua.ls Logo

Pentair STA-RITE SWIMMEY Series - User Manual

Pentair STA-RITE SWIMMEY Series
38 pages
Go to English
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
SWIMMEY
253PA460-01 10/2018
IT Istruzioni originali 1
EN Instruction Manual 5
FR
Instructions de service
9
DE Betriebsanleitung 13
ES Manual de instrucciones 17
NL Manual de instrucciones 21
RU
Руководство по эксплуатации
25

Table of Contents

Questions and Answers

  • C
    Carl RobertsonAug 3, 2025
    Why does my Pentair Swimming Pool Pump stop after running for a short time?
    • D
      Donna GonzalezAug 3, 2025
      Your Pentair Swimming Pool Pump might be stopping due to several reasons: 1. The pump is running without fluids. Check for any damage and address the cause. 2. The power supply doesn't match the data on the nameplate. Examine the voltage on the power supply cable leads. 3. The liquid is too hot. Lower the temperature of the liquid. 4. The motor isn't getting enough air. Increase airflow or relocate the pump.
  • N
    Nicole WalkerAug 17, 2025
    What to do if my Pentair STA-RITE SWIMMEY motor runs but doesn't pump liquid?
    • E
      erinroseAug 17, 2025
      If the motor of your Pentair Swimming Pool Pump runs but doesn't pump liquid, consider these potential causes: * The pump is sucking air. Ensure all joints are airtight. * The liquid level is incorrect. Check that the level of liquid is appropriate. * The foot valve is faulty. Make sure the foot valve is airtight and not blocked.

Summary

Chapter 1 Features

Safety Warnings and Precautions

Covers electric shock, serious risks, damage, and child safety warnings for proper use.

Chapter 2 Limitations

Operational Limitations

Details temperature, suction height, and pressure limits for pump operation.

Chapter 3 Installation

Installation Safety and Guidelines

Covers electrical safety, protection, placement, and piping advice.

Chapter 4 Electrical Connections

Electrical Safety and Connections

Covers voltage/frequency checks, grounding, circuit breakers, and cable types.

Chapter 5 Starting the Unit

Startup Procedures and Warnings

Outlines steps for priming, operation without fluid, and valve closure warnings.

Chapter 6 Maintenance and Troubleshooting

Maintenance Procedures

Details cleaning the pre-filter, transparent cover, and filter.

Troubleshooting Common Problems

Lists common issues like pump not running or not pumping liquid and their remedies.

Figure; Picture 1

Figure; Picture 2

Warranty

Warranty Terms and Conditions

Explains legal warranty coverage, exclusions, and procedures for claims.

Pentair STA-RITE SWIMMEY Series Specifications

General IconGeneral
BrandPentair
ModelSTA-RITE SWIMMEY Series
CategorySwimming Pool Pump
LanguageEnglish

Related product manuals