Pentax 30 - Changing the USB Connection Mode; Resetting to Default Settings [Reset]

99
6
Editing / Settings
The USB Connection mode is changed depending on whether the USB
cable is to be connected to a printer (PictBridge) or a computer.
1 Select [USB Connection] on the [B Set-up] menu.
2 Use the four-way controller (45) to select [PC] or
[PictBridge].
3 Press the OK button.
The camera is ready to be connected to a computer or printer.
You can reset all the settings other than the date / time and
language/ .
1 Select [Reset] on the [B Set-up] menu.
2 Press the four-way controller (5).
The Reset screen will be displayed.
3 Use the four-way controller (2) to select [Reset].
4 Press the OK button.
The camera is ready to take or play back images.
Changing the USB Connection Mode
Do not connect the camera to your PC while [PictBridge] is selected
for the USB connection mode.
Resetting to Default Settings [Reset]
The SIMPLE menu is displayed by pressing the MENU button after
performing the above resetting.
Format
Date Adjust
USB Connection
Screen Setting
Set-up
MENU
05/03/2004
English
PC
OK
SIMPLE
Exit OK