12
1
Getting Started
Powering the Camera
Install batteries in the camera. Use one CR-V3, or use two AA lithium
batteries, AA Ni-MH batteries, or AA alkaline batteries.
1 Slide the battery / card cover in the direction indicated
by the arrow and flip the cover open.
2 Insert the batteries according to the +- indicator in
the battery chamber.
3
Close the battery / card cover and push horizontally to lock.
Installing the Batteries
When using for a prolonged period, please use the AC adapter
D-AC5 (optional) (p.14).
• CR-V3 battery, AA alkaline and AA lithium batteries are not
rechargeable.
• Do not open the battery / card cover or remove the batteries when
the power switch is on.
• If you do not intend to use the camera for a long time, remove the
batteries. Otherwise, the batteries may leak.
• If the date and time settings have been reset when you insert new
batteries after a long time, follow the procedure for “Setting the
Date and Time” (p.19).
• Insert batteries correctly. Batteries inserted backwards may cause
malfunction.
(Using AA batteries)
1
2 2
(Using CR-V3)
Battery / Card cover
To Next Page
Loading...
