Pentax 30 - Printing Single Image

85
5
Playback / Deleting
1 Select [Print One] by pressing the
four-way controller (23).
2 Press the OK button.
The Print screen appears.
3 Use the four-way controller (45) to choose the image
to print.
4 Use the four-way controller (23)
to select the number of prints.
You can set up to 10 prints.
5 Use the Q Playback button to select O[On] or P [Off].
O (On) : The date will be imprinted.
P (Off) : The date will not be imprinted.
6 Press the OK button.
The image is printed using the selected settings.
The message “Continue printing ?” is displayed after the image has
been printed. Press the OK button to return to step 3 and continue
printing. Press the MENU button to end printing.
Press the MENU button to stop printing halfway.
Printing Single Image
DPOF AUTOPRINT
Print All
Select printing mode
S e l e c t p r i n t i n g m o d e
Select printing mode
Print One
OK
OK
O K
OK
100-0001
01
OK
MENU
Date
D a t e
Date
Print this image
Exit
E x i t
Print
P r i n t
Exit Print
Date
Copies