Pentax 30 - Displaying Shooting Information in Capture Mode

37
4
Taking Pictures
You can display information on the LCD monitor when shooting.
Following display modes can be changed by pressing the OK button each time.
Normal Display
Shooting information is displayed when the
power is turned on.
1 Flash mode 2 Shooting mode
3 Focus mode 4 Capture mode
5 AF frame 6 Card / Built-in memory
7 Number of recordable images
8 Battery indicator 9 Date and time
Histogram Display
The brightness distribution of the image is
displayed.
The horizontal axis shows the brightness
(darkest at the left end and brightest at the
right end) and the vertical axis shows the
number of pixels.
1 Shutter speed 2 F number
3 Histogram
(No.1 and 2 appear when shutter release
button is pressed halfway.)
No Information Display
No shooting information is displayed.
• The AF frame is displayed in Autofocus
mode.
• Settings are displayed for a few seconds
when changed.
LCD Monitor Off
The LCD monitor is turned off.
Displaying Shooting Information in Capture Mode
The display cannot be turned off in C
and F mode.
Saving the Display Mode 1p.70
100
11:20
1 1 : 2 0
11:20
10/10/2004
1 0 / 1 0 / 2 0 0 4
10/10/2004
1 2 3 4 5 6 7
8
9
100
1/100
1 / 1 0 0
F3.5
F 3 . 5
1/100
F3.5
3
12
Normal Display