101
7
Appendix
Messages such as the following may be displayed on the LCD monitor
when using the PictBridge function.
Card not formatted The SD Memory Card you have inserted is
unformatted or has been formatted on a PC or other
device and is not compatible with the camera. (p.94)
Formatting The SD Memory Card or Built-in memory is being
formatted. (p.94)
Card locked The SD Memory Card write protect switch is in the
[LOCK] position. (p.16)
No paper There is no paper in the connected printer.
No ink There is no ink in the connected printer.
Printer error
The connected printer sent an error message to the
camera.
Data error
The connected printer sent a data error message to
the camera.
Paper stuck The paper in the connected printer has jammed.
To Next Page
Loading...
