Pentax 67 - Loading Film.15~19

LOADING FILM (Avoid direct sunlight when loading or unloading film.)
To avoid film jams, load the film correctly ac¬
cording to the procedure mentioned hereafter.
1. Open the back cover by sliding the release
tab.
2. Unfold the crank of the film spool retainer
knob, turn the knob counterclockwise and
pull down. Engaging the hole of the spool to
the upper film retainer, put an empty spool
into the film chamber below the wind lever.
Then, push in the retainer knob and turn it
clockwise to lock in place.
15