Pentax 67 - Flash Photography Guide

FLASH PHOTOGRAPHY
To connect an electronic flash to the 67
camera, a synchro cord with the JIS (PC) type
plug should be inserted to the X terminal. Set
the shutter dial at X (1 /30sec) or any speed
slower than 1/60 sec.
• Both shutter speed and lens aperture
must be set manually when using any
electronic flashes.
32
To attach the Pentax AF400T flash unit, set up
the 67 body with the AF400T 67 bracket and
connect them using the 4P synchro cord C.
Other clip-on type electronic flash unit can be
attached to the 67 by either of the following
ways;
• Hot shoe grip -t- AF400T 67 bracket -l- 4P
synchro cord C
• 67 grip -l- 645 hot shoe adapter LS