Pentax 67 - Exposure Metering and Settings

EXPOSURE
I
Since the 67 camera has no exposure meter, a
hand held exposure meter or the TTL Penta¬
prism should be used to measure the light. The
way to use the TTL Pentaprism is as follows;
1. Set the ISO rating of the film loaded by lift¬
ing and rotating the finder's outer ring of the
shutter dial.
2. Turn the switch to the ON position.
3. Adjust the lens aperture ring or shutter dial
until the needle in the meter window
matches the center index. The TTL
Pentaprism metering system is an overall
averaging metering type.
28
For the details of the TTL Pentaprism,
please refer to the operating manual, 67
TTL PENTAPRISM FINDER.