Pentax 67 - Insert Camera Battery

INSERTING BATTERY
Use one of the battery types mentioned below;
6V Alkaline battery (4LR44, A544)
6V Silver-oxide battery (4SR44,544, PX28)
• If the shutter is operated without a bat¬
tery or the battery is installed incorrectly,
the safety device will be activated and
the mirror will stop partway up.
• Insert a new battery when the mirror is in
the normal position, not when it is part¬
way up, as it will shorten the battery life.
1. Lift up the crank on the bottom of the
camera and turn it counterclockwise, and
take out the battery case.
2. Put a new battery into the battery case and
reinsert the battery case making sure that
the (+) and (-) marks on the battery cor¬
respond with the { - I- ) and (-) marks inside
the battery chamber.
3. To secure the battery case, turn the crank in
the direction of the arrow until the red dots
align.
3