Pentax 67 - Page 8

Press the battery check button at the back of
the camera. If the battery check lamp does not
light, the battery power is insufficient. In such
a case, replace the battery immediately.
4
Press the safety device release button with a
pointed object, and press the shutter button
for one blank exposure. The mirror will then
return to its original down position.
• When the battery power becomes insuffi¬
cient, the mirror will stop partway up block¬
ing the viewfinder.
• It will shorten the battery life if the battery
check button is pressed too frequently.
• The shutter may work for a while even if the
battery lamp does not light. However, the
shutter speeds may be inaccurate.