– 39 –
1-3. Endoscope components and accessories
Endoscope components and accessories can be subjected to the following cleaning, disinfection,
and sterilization processes.
Model Cleaning
High-Level
Disinfection
Optional Sterilization
Name Number Manual Ultrasonic
Steam
Sterilization
STERRAD
®
NX™
system
Endoscope
Component
Suction
Control Valve
OF-B179 Y Y Y Y Y
Inlet Seal OF-B190 Y Y Y Y Y
Accessory Bite Block OF-Z5 Y Y Y Y N
Reprocessing
Accessory
PVE Soaking
Cap
OE-C9 Y* N Y* N N
Ventilation
Cap
OF-C5 N N N N Y**
Cleaning
Adapter
OF-B155 Y Y Y Y N
Cleaning
Brush
CS6002SN Y Y Y Y N
Cleaning
Brush
CS6015ST Y Y Y Y N
Cleaning
Brush
CS3010S Y Y Y Y N
Cleaning
Brush
CS-C3S Y Y Y Y N
Y : YES
N : NO
* : The PVE Soaking Cap (OE-C9) should be attached to the endoscope during cleaning and
disinfection procedures.
** : The ventilation cap (OF-C5) should be attached to the endoscope during the STERRAD
®
sterilization.
Automated Endoscope Reprocessor (AER) manufacturers may not make
specific claims or provide special instructions for reprocessing all of the
removable endoscope components and accessories that are integral to the
safe and effective operation of flexible endoscopes. Therefore, should the
AER manufacturer's instructions not specically address reprocessing of any
particular endoscope component (suction valve, inlet seal, etc.) reprocess
those components manually as described in this manual. Prior to use, check
with the AER manufacturer regarding their specific claims with respect to
reprocessing individual endoscope components.
Accessory
Cleaning
1
To Next Page
Loading...
Need help?
General
