22
If you shoot without positioning the autofocus frame
( ) on the main subject, only the foreground will be in
focus. When the main subject is off the autofocus frame
in the center of the viewfinder, use the focus-lock tech-
nique. (Focus lock is the function to lock focus.)
1. Focus on the subject with the autofocus frame
( ). (Fig. 11-1)
2. When the shutter release button is depressed
halfway down, the green lamp lights up and the
exposure and focus are temporarily locked. (Fig.
11-2)
3. While depressing the shutter release button
halfway, re-aim the camera or recompose the pic-
ture, then release the shutter. (Fig. 11-3)
Note:
• You can cancel focus lock simply by lifting your finger
from the shutter release button.
FOCUS-LOCK SHOOTING
Rewinding the film in mid-roll (Fig. 10)
If you wish to unload a film before exposing all the
frames, push the mid-roll rewind button with the protru-
sion part of the strap clamp.
• The lens retracts and then film rewinding starts.
• When rewind is completed, the motor stops, and, ( )
blinks for 5 seconds, indicating that the back cover may
be opened safely.
To Next Page
Loading...
