Pentax K 100D Super - Page 89

87
3
Basic Operations
2 Press the four-way controller
(m).
The DPOF screen appears.
3 Press the { button.
The screen for making DPOF settings
for all images appears.
4 Use the four-way controller (op) to choose the number of
copies and whether to insert the date (O) or not (P).
Refer to Steps 4 and 5 of “Printing Single Images” (p.86) for details of
how to make the settings.
5 Press the 4 button.
The DPOF settings for all the images are saved and the camera returns
to playback status.
The number of copies specified in settings for all images applies to all the
images. Before printing, check that the number is correct.
Settings for single images are canceled when settings are made for all images.
00
Copies
100-0046
10 0- 00 46
100-0046
Fn
OK
OK
OK
All images
All images
OKAll images
Date
00
Copies
OK
OK
OK
OK
DPOF setting for all
DPOF setting for all
images
images
DPOF setting for all
images
Date