Pentax K 100D Super - Connecting the Camera to the Printer

90
3
Basic Operations
5 Use the four-way controller
(mn) to select [PictBridge].
6 Press the 4 button.
The setting is changed.
7 Press the 3 button.
1 Turn the camera off.
2 Connect the camera and PictBridge compatible printer
using the USB cable supplied with the camera.
The PictBridge logo is displayed on PictBridge compatible printers.
Connecting the Camera to the Printer
NTSC
PC
PC-F
Brightness Level
Set-up
Video Out
Transfer Mode
Auto Power Off
Folder Name
File #
0
OK
OKCancel
PictBridge