4
The captured still pictures and movies can be transferred to a computer
by connecting the Q using a USB cable and can be managed using
the provided software.
We recommend the following system requirements to connect your camera
to a computer or to use the software “PENTAX Digital Camera Utility 4”
included in the provided CD-ROM (S-SW90).
Windows
Macintosh
Connecting the Camera
to Your Computer
Using Captured Images on a Computer
OS
Computer with Windows XP (Home Edition/Professional/x64
Edition) SP2 or later, or Windows Vista preinstalled
* With Windows 2000, you can only transfer images from your
camera using a USB cable.
CPU
Pentium 4 or higher (Intel Core Processor or higher
recommended)
RAM
1.0 GB or more (2.0 GB or more recommended. For Windows
Vista, 3.0 GB or more recommended)
Free Disk Space 1.0 GB or more (2.0 GB or more recommended)
Monitor
1280×1024 pixels or more with 24-bit full color (approximately
16.77 million colors)
Others USB 2.0 port must be standard equipment
OS
Macintosh with Mac OS X 10.3.9, 10.4, or 10.5 preinstalled
* With Mac OS X 10.2, you can only transfer images from your
camera using a USB cable.
CPU
PowerPC G5 or higher (Dual CPU or Intel Core processor
recommended. Universal Binary format)
RAM 1.0 GB or more (2.0 GB or more recommended)
Free Disk Space 1.0 GB or more (2.0 GB or more recommended)
Monitor
1280×1024 pixels or more with 24-bit full color (approximately
16.77 million colors)
Others
USB 2.0 port must be standard equipment, QuickTime 7.0 or later
e001_kb474_qg_pc_7.fm Page 4 Thursday, May 28, 2009 9:41 AM