77420 - 50/107 -
21-3-1．Alpha Adjustment (Cross)
①Below screen will be displayed. Click [ALPHA ADJUSTMENT].
②Click [START]
③Follow the screen and set the camera.
Attach the AF position jig (Cross) to the camera and set the Light source toLV12.
④Set the camera (with AF position jig) to center of Light source window and click [OK].
⑤Turn the adjustment screw No.1 (or No.3) by HD driver until green is indicated on Value window(OK).
⑥When green (OK) is displayed press [Stop].
SCREW No.1
To Next Page
Loading...
