77420 - 75/107 -
③When below message is displayed, set the stage in the X direction.
Turn ON the controller. (Confirm the meter is 1,000rpm)
Press [OK] button to start X adjustment.
④Turn OFF the controller and Press [OK] button. (next adjustment will be started)
⑤Turn OFF the controller. Change the position of camera and stage for Y adjustment.
[Caution] The weight of the stage is very heavy, so pay attention the handling.
Do not hold black stand parts.
⑥Set the chart 2.00m
from tripod screw on camera stand and
match the chart (■) with frame of spot measurement in the view
finder.
（Go to the next page）
To Next Page
Loading...
