77420 - 81/107 -
8-5. AF shift adjustment (If necessary Kr_PDCAdj)
*If AF does not improve by AF focus adjustment and there is no other factor, execute AF shift
adjustment if necessary.
① Start up PDCAdj_v204.exe.（Below main screen will be displayed.）
② The set up information of a present camera appears to the left of the screen when the Execute button is clicked.
③ Move the cursor right or left to change the value of AF shift. (+: shift to front side, -: shift to back side)
④ Click [Input] to adjust. (Can not input more than ±100um. There is other factor)
⑤ Press [Execute] button, Confirm the adjustment status.
[AF focus shift function for individual lens]
*If fine adjustment is necessary for AF focus on lens side, it came be compensated by camera with this
adjustment.
*It cam be adjusted 20 kind of AF lens.(Basically the same as K10D) (Refer to T07-005)
① Start up PDCAdj_v204.exe.（Below main screen will be displayed）
② The set up information of a present camera appears to the left of the screen when the Execute button is clicked.
③ Attach the object lens to the camera and click [GET]. Lens information and data will be displayed.
④ Move the cursor right or left to change the value of AF shift.
⑤ Click [Input] to adjust. Data will be written.
⑥ Note: when input multiple lens data, the data should be moved over top side at end of adjustment.
Main screen
Current status
Data of camera
Value for shift
To Next Page
Loading...
