22
3 Look through the viewfinder to
view the subject.
A zoom lens can be used to change the
size of the subject in the viewfinder.
1 Using a Zoom Lens (p.25)
4 Position the subject inside the
AF frame and press the shutter
release button halfway.
The focus indicator ] appears in the
viewfinder when the subject comes into
focus.
The flash does not pop up automatically.
If the flash is necessary, the flash status
E blinks. Press the K button (p.26) to
pop up the flash manually.
1Operating the shutter release button
(p.23)
1Subjects that are Difficult to Focus on
(p.24)
1Using the Built-in Flash (p.26)
5 Press the shutter release
button fully.
The picture is taken.
Focus indicator
Flash
status
To Next Page
Loading...
