To Next PageTo Next PageWhy my Pentax K20D Digital Camera does not turn on?
Your Pentax Digital Camera might not be turning on because the battery isn't installed. Ensure a charged battery is installed. Alternatively, the battery power may be low. Replace it with a charged battery or use the optional AC adapter D-AC50.
What to do if the shutter does not release on Pentax K20D Digital Camera?
If the shutter on your Pentax Digital Camera isn't releasing, it might be because the lens aperture ring setting is not in the correct position. Set the lens aperture ring to the s position or select [Permitted] in [36. Using aperture ring] in the [A Custom Setting] menu. The flash might be charging; wait until charging is finished. Another reason could be that there is no available space on the SD Memory Card. Insert an SD Memory Card with available space or delete unwanted images. Finally, the camera may be recording; wait until recording is finished.
How to fix Shake Reduction if it does not work on Pentax K20D?
If the Shake Reduction isn't working on your Pentax Digital Camera, first, ensure that the Shake Reduction function is turned on using the switch. If you're using a lens for which focal length information cannot be acquired, set the [Focal Length] on the [Input Focal Length] menu. If the shutter speed is too low, making Shake Reduction ineffective for panning or night scenes, turn off Shake Reduction and use a tripod. Finally, if the subject is too close, move away or turn off Shake Reduction and use a tripod.
Why does the flash not discharge on my Pentax K20D Digital Camera?
The flash on your Pentax Digital Camera might not be discharging because the Capture mode is set to B (Green) mode. Only C (Auto discharge) and D (Auto flash+Redeye reduct) are available for the Flash Mode when the Capture mode is B. The flash will not discharge when the subject is bright in these modes. In Capture modes other than B, only the flash mode that discharges every time the flash recharges is available. Try different Capture modes.
Why AE lock function does not operate on Pentax Digital Camera?
The AE lock function on your Pentax Digital Camera is not available when set to B (Green), p (Bulb) or M (Flash X-sync speed) mode. Use AE lock with any setting other than B (Green), p (Bulb) or M (Flash X-sync speed) mode.
What to do if USB connection with a printer does not work properly on Pentax Digital Camera?
If the USB connection with a printer isn't working correctly on your Pentax Digital Camera, the Transfer Mode may be set to [PC]. Set [USB Connection] in the [R Set-up] menu to [PictBridge].
What to do if USB connection with a computer does not work properly on Pentax K20D Digital Camera?
If the USB connection with a computer isn't working correctly on your Pentax Digital Camera, the Transfer Mode may be set to [PictBridge]. Set [USB Connection] in the [R Set-up] menu to [PC].
What to do if Pentax Digital Camera does not operate correctly due to static electricity?
This can be remedied by taking the battery out and putting it back in again. When the mirror remains in the up position, take the battery out and put it back in again. Then, turn the power on. The mirror will retract. After the procedure is done, if the camera operates correctly, it does not require any repairs.
General| Camera Type | Digital SLR |
|---|---|
| Sensor Type | CMOS |
| Sensor Size | 23.4 x 15.6 mm |
| Resolution | 14.6 MP |
| Continuous Shooting Speed | 3 fps |
| Image Stabilization | Sensor-shift |
| Screen Size | 2.7 inches |
| Screen Resolution | 230, 000 dots |
| Storage Media | SD/SDHC |
| Dimensions | 141.5 x 101 x 70 mm |
| Weather Sealing | Yes |
| Image Processor | PRIME (Pentax Real Image Engine) |
| Shutter Speed | 30-1/4000 sec |
| Viewfinder | Optical (pentaprism) |
| Battery | Rechargeable Lithium-Ion battery |
| ISO Range | ISO 100 - 3200 (expandable to 6400) |
Provides general information about the camera's features and design.
Details the key features and specifications of the K20D camera.
Identifies and explains the purpose of the camera's buttons, dials, and other controls.
Explains the procedure for navigating and using the camera's menu system.
Describes how to select different exposure modes using the mode dial.
Covers charging, inserting, and managing the camera's battery.
Provides instructions on how to handle the SD memory card for storage.
Guides users through the first-time setup of the camera, including language and date.
Explains the process of mounting and dismounting lenses onto the camera body.
Covers fundamental steps for taking pictures, including holding the camera.
Details how to activate and use the camera's integrated flash unit.
Explains how to use the SR feature to reduce camera shake for sharper images.
Explains how to control exposure using shutter speed, aperture, and sensitivity.
Describes the autofocus modes and manual focusing techniques for sharp images.
Details the function and operation of the AF button for focusing control.
Covers adjusting flash intensity for optimal lighting in various shooting conditions.
Provides guidance on connecting and using compatible external flash units.
Explains how to adjust image tone, color, and sharpness before shooting.
Details options for saving images as JPEG or RAW files.
Covers adjusting white balance for accurate color reproduction under different lighting.
Explains how to access and use the playback menu options.
Guides users on how to magnify images for detailed review.
Provides instructions for removing multiple unwanted images from the memory card.
Explains how to safeguard images from accidental deletion.
Covers applying creative digital filters to edit captured images.
Details the process of converting and editing RAW image files.
Explains how to set print options for direct printing services.
Guides users on direct printing from the camera to a PictBridge printer.
Explains how to navigate and use the camera's setup menu.
Provides instructions for initializing the SD memory card.
Covers customizing audible alerts, date/time, and menu language.
Details how to change text size and guide display settings.
Explains how to restore default settings for major menu sections.
Guides users on resetting custom function settings to factory defaults.
Covers resetting saved user settings and file name conventions.
Lists the factory default settings for various camera functions.
Details compatibility and functionality with different types of lenses.
Provides instructions for cleaning the camera's image sensor.
Explains common error messages and their solutions.
Offers solutions for common camera problems and operational issues.
