230
Camera Settings
10
Setting the Image File Naming
Convention
You can select the method for assigning the folder names for storing
images. The default setting is [Date].
Set in [Folder Name] in the [R Set-up] menu. (p.216)
You can select the method for assigning the file number of an image when
saved to a new folder. Select O (On) or P (Off) for [File No.] in [Memory]
in the [A Rec. Mode] menu. (p.236)
Selecting the Folder Name
Date
The two digits of the [month] and [day] on which the picture was taken
are assigned as the folder name in the form of [xxx_MMDD]. [xxx] is
a sequential number from 100 to 999.
(Example) 101_0125: for folders with pictures taken on January 25th
PENTX
The folder name is assigned in the form of [xxxPENTX].
(Example) 101PENTX
Selecting the File Number Setting
O (On)
The file number of the last image saved to the previous folder is saved
and subsequent images are assigned sequential file numbers even if
a new folder is created.
P (Off)
The file number of the first image saved to a folder returns to 0001
each time a new folder is created for saving images.
When the number of storable images exceeds 500, captured images are divided into
folders of 500 images each. However, in Auto Bracket, images will be stored in the same
folder until shooting is completed, even if the number of images exceeds 500.
1
min
Date
PENTX
MENU
Set-up
Folder Name
Auto Power Off
File Name
Select battery
Pixel Mapping
Dust Alert
OK
OK
Cancel
Downloaded From camera-usermanual.com Pentax Manuals
To Next Page
Loading...
Need help?
General
