Pentax K20D User Manual

108
Shooting Functions
4
2 Look through the viewfinder
and check the position of the
subject.
3 Use the four-way controller (2345) to select the desired
AF point.
The AF point lights red in the viewfinder (Superimpose AF Area) and you
can check where you set the AF point.
If the subject is outside the range of the focusing area, the camera cannot
automatically focus on the subject. In this situation, set the focus mode
lever to l (Single mode). You can aim the focusing area toward the
subject, use focus lock and recompose the picture.
1 Frame the desired composition
for your picture in the
viewfinder.
Use focus lock function when the
subject you wish to focus on is not
inside the focusing area.
Fixing the Focus (Focus Lock)
(Example) The person is out of
focus and the background is
focused instead.
Downloaded From camera-usermanual.com Pentax Manuals

Pentax K20D Specifications

General

Camera Type	Digital SLR
Sensor Type	CMOS
Sensor Size	23.4 x 15.6 mm
Resolution	14.6 MP
Continuous Shooting Speed	3 fps
Image Stabilization	Sensor-shift
Screen Size	2.7 inches
Screen Resolution	230, 000 dots
Storage Media	SD/SDHC
Dimensions	141.5 x 101 x 70 mm
Weather Sealing	Yes
Image Processor	PRIME (Pentax Real Image Engine)
Shutter Speed	30-1/4000 sec
Viewfinder	Optical (pentaprism)
Battery	Rechargeable Lithium-Ion battery
ISO Range	ISO 100 - 3200 (expandable to 6400)