42
Getting Started
2
Choose the number of pixels (size) and quality level (JPEG data
compression rate) of pictures according to how you intend to use the
pictures you have taken.
Pictures with larger recorded pixels or more Es are clearer when printed.
The number of pictures that can be taken (the number of pictures that can
be recorded on an SD Memory Card) decreases with larger file sizes.
The quality of the captured photo or printed picture depends on the quality
level, exposure control, resolution of the printer and a variety of other
factors so you do not need to select more than the required number of
pixels. For example, to print in postcard size, i (1824×1216) is
adequate. Set the appropriate recorded size and quality level depending
on purpose.
Choose the appropriate number of recorded pixels and quality level for
JPEG images on the [A Rec. Mode] menu.
1Setting the JPEG Recorded Pixels (p.156)
1Setting the JPEG Quality Level (p.157)
JPEG Recorded Pixels, JPEG Quality and Approximate Image
Storage Capacity
• The above table shows the approximate image storage capacity when using a
512 MB SD Memory Card.
• The above figures may vary depending on the subject, shooting conditions,
shooting mode and SD Memory Card, etc.
Recorded Pixels and Quality Level
When the File Format is JPEG
JPEG Quality
JPEG Rec. Pixels
Z
Premium
C
Best
D
Better
E
Good
X
(4672×3104)
34 58 105 205
J
(3872×2592)
50 84 148 308
P
(3008×2000)
88 142 245 457
i
(1824×1216) 230 368 616 1118
When the number of storable images exceeds 500, captured images are
divided into folders of 500 images each. However, in Auto Bracket, images will
be stored in the same folder until shooting is completed, even if the number of
images exceeds 500.
Downloaded From camera-usermanual.com Pentax Manuals
To Next Page
Loading...
Need help?
General
